Original
By certification 
| Features |
1. 5 way 3 way single acting air valve .we also called air pump solenoid.
2. center closed ,center pressure and center exhaust of 3 types of central function for your choice.
3. 1/8 solenoid valve manifold with the base to save installation space.
4. pneumatic control instead of electric can be produced .
5. 5 way single acting pneumatic valve .
| Ordering code |
| Product Parameter |
Model |
4V110-M5 |
4V110-06 |
4V130C-06 |
|
Product name |
single acting pneumatic valve |
|||
Fluid |
Air(to be filtered by 40 μ m filter element) |
|||
Acting |
Internal pilot or external pilot |
|||
Port Size |
In=Out=exhaust=1/8'' |
In=Out=exhaust=1/8'' |
||
Orifice Size |
10mm2 (Cv=0.56) |
12 mm2 (Cv=0.67) |
9.00 mm2 (Cv=0.50) |
|
Valve Type |
5 port 2 position |
5 port 3 position |
||
Operating Pressure |
0.15~0.8MPa (21~114psi) |
|||
Proof Pressure |
1.5MPa (215psi) |
|||
Temperature ℃ |
-20~70 |
|||
Material of Body |
Aluminum alloy |
|||
Max. frequency |
5 cycle/sec |
5 cycle/sec |
5 cycle/sec |
5 cycle/sec |
| Overall Dimension |
| manifold base with 5 way single acting pneumatic valve |
5 way single acting pneumatic valve is a combination of direct action and pilot type. When there is no pressure difference between the inlet and the outlet, after the power is turned on, the electromagnetic force directly lifts the pilot valve and the main valve closing member upwards in turn, and the valve opens. When the inlet and outlet are When the starting pressure difference is reached, after the power is turned on, the electromagnetic force pilots the small valve, the pressure in the lower chamber of the main valve rises, and the pressure in the upper chamber decreases, so as to use the pressure difference to push the main valve upward; when the power is off, the pilot valve uses the spring force or medium pressure. Push the closing piece and move it down to close the valve."
The difference between single control solenoid valve and double control solenoid valve：
The single solenoid valve has one coil, which changes to another state when it is energized, and automatically returns to the original state when it is not energized. The double solenoid valve has two coils, one state is energized on one side, and the state before power off is maintained, and the other One side of the power is changed to another state, and the power is turned off to maintain the state before the power.
how to choose 5 way single acting pneumatic valve or double acting solenoid valve:
If the valve commutation time is not long, you can choose single control. If the commutation time is long, the coil needs to be energized for a long time, and the coil will be energized for a long time, which will cause heat to burn out the coil from the surface. In this case You can choose a double control valve, if you need to reset after power off, use a single electric control. If it needs to be maintained after power off, then use a dual control solenoid valve.
http://www.nbyxpc.com/
