Original
Uses: suitable to vertical lifting of steel plate.
Load range: 0-16 tons.
Made from low-carbon alloy steel.
Need test one clamp as rated load, but during lifting operations it can one or two clamps together.
Only a steel plate while lifting, ban laminated plates lifting and ban touch the hanging objects while lifting.
When lifting, it must pull the handle ring up so that the spring is tension; when unload, pull the handle ring down, after the spring relax, the steel plate and clamp will be away off.
2 times as much as test load is the maximum working load.
Do not overload.
CDH Vertical Plate Clamps diagrammatic sketch
Model |
Maximum working load (t / 2-only) |
Opening size (mm) |
Weight (kg) |
CDH0.8T |
0.8 |
0-16 |
2.8 |
CDH1T |
1 |
0-20 |
2.5 |
CDH2T |
2 |
0-30 |
6 |
CDH3.2T |
3.2 |
0-40 |
10 |
CDH5T |
5 |
0-50 |
18 |
CDH8T |
8 |
0-60 |
26 |
CDH10T |
10 |
0-80 |
|
CDH16T |
16 |
50-150 |
CD Vertical Steel Plate Clamps
Uses: suitable to vertical lifting of steel plate.
Load range: 0-16 tons.
Made from low-carbon alloy steel.
Need test one clamp as rated load, but during lifting operations it can one or two clamps together.
Only a steel plate while lifting, ban laminated plates lifting and ban touch the hanging objects while lifting.
When lifting, it must pull the handle ring up so that the spring is tension; when unload, pull the handle ring down, after the spring relax, the steel plate and clamp will be away off.
2 times as much as test load is the maximum working load.
Do not overload.
